This SKUD is brand new and was never used!  It is currently located at our Lloydminster facility.  Get this brand new Skud (built in 2005 but never used) at a huge savings vs purchasing one from Foremost.  We can also arrange delivery to anywhere you need it and include the delivery on a quote.  Please call 403-613-7134 or use our contacts page if you need any details or have any questions.

The SKUD, an innovative free water knockout technology developed by Corlac (now Foremost), is field proven to provide superior free water separation at a fraction of the capital cost of conventional vessels.

Consider the SKUD advantage:

  • Increase existing treating capacity 30% – 300% (+)
  • Emulsion processing capacity to 11,400 m3 (72,000 bbl) per day
  • Substantially improve water qualities to a typical 150 ppm
  • Effective separate gas, solds and H2S upstream of facilities
  • 1/4 to 1/2 the capital cost of conventional Free Water Knock Outs
  • Reduce operating costs by reducing chemical usage
  • Reduce gas sweetening costs as H2S remains in the water phase
  • Field tested and proven successful form light to heavy oil* Dependent on individual application

SKUD Applications:

  • Increasing capacity of treating facilities
  • Optimization of waterfloods
  • Construction of low cost facilities
  • Consolidation of core areas
  • Dewatering production at satellites
  • Processing 3rd party emulsion to generate a new revenue stream

More Information

The patented SKUD™ Inclined Free Water Knock Out (IFWKO) is the most significant development in gravity based oil-water separartion technology in 50 years.

Foremost has pioneered the identification and development of completely new niche markets for water handling equipment. As your oilfield matures and the water cut increases, optimize field return through installation of SKUD technology in the following three applications:

  • At a satellite or well pad for direct-to-injection water disposal – no tanks
  • In front of an existing conventional FWKO at a battery or CPF that is at or beyond capacity
  • As an inlet slug catcher (oil and gas applications) at a battery, CPF, or satellite

The SKUD has been successfully used in applications from 8 – 40 API, across a wide range of process temperatures, and with water cuts from 50 – 90%.

The SKUD™ is able to outperform conventional FWKOs. The SKUD™ will process the same volume of water as a conventional FWKO, at the same water quality, with a fraction of the retention time. This equates to a smaller, more cost effective process solution.

Specifications

Service:  Sweet

NDT:  Radiography:  100% RT-1 as per US-11(a)

PWHT:  11500F For 60 min

Joit Efficiency:  Long seams = 1.00, CIRC. Seams = 1.00

Head Thk Nom.:  0.375″      Min. Thk.:  0.3125″

Shell Thk Nom.:  0.25″     Min. 0.20″

NDE:  UT:  Cat. D Welds Only

Corr. Allow.:  Heads 0.0625″     Shell 0.0625″

Registered Weld ProcedureCOR 6,7,20

Volume:  10.95 cu m     387 cu ft

MAWP:  100 psi @ 2120F (690 kPa @ +1000C/-290C)

MDMT:  -200F @ 100 psi

Hydrotest:  130 psi / 896 kPa

Vessel Type:  Inclined Free Water Knock Out

CRN:  R8811.2

External:  Corlac Spec:  6000-001. Sand Blast Spec SSPC SP-6, SIL 7.DEVOE 359, 3-5 mils. Gloss Black

Internal:  Corlac Spec:  6000-002. Sand Blast Spec SSPC SP-5, 2-3 mils, SIL 7; 2 Coats & DFT:  DOVOE 253, 6-7 mils (Total: 12-14 mils)

All Internal Piping:  Corlac Spec:  6000-002. Sand Blast Spec SSPC PS-6, SIL 7. DOVOE 253, 8-12 mils

Insulation:  None


Need more information?  Ready to place an order?
Please call 1-855-5CALROC, use our contact page or talk to one of our sales experts directly:

Dan Echino
Cell: 403-613-7134
E-mail: dan@calroc.ca

Larry Holman
Cell: 403-852-0966
E-mail: larry@calroc.ca

Share this listing!