Hyosung Three Phase Induction Motors

NEW ARRIVAL!  BRAND NEW, NEVER USED! Call Dan Echino at 403-613-7134 or 1-855-5CALROC (225762) for details and a quote.
These Hyosung Three Phase Induction Motors were built in 2011 and purchased for a cancelled project and are in brand new, never used condition.  There are 4 units available.  They can be viewed at our Edmonton, Alberta storage facility.  Transport to your site available!  We are accepting offers so do not hesitate to submit your best offer!  Please call 1-855-5CALROC (225762) or use our contacts page if you have any questions, need a quote or are ready to place an order.

Hyosung Three Phase Induction Motors

Hyosung’s IEC standard motors feature excellent insulation systems and strict process controls and quality management that allow for a low vibration and noise structure design. Its double cage rotor structure and special varnish finishing, as well as international standards (e.g., IEC, NEMA, and IEEE), allow the motor to run perfectly under various load conditions including a condition with a wide moment of inertia.

Features

  • Excellent insulation system (Hyosung class F Supact Insulation System)
  • Special cage rotor structure suitable for various load conditions (double cage, deep-slot cage type)
  • Low vibration and noise structure design (ANSYS & NASTRAN)
  • Optimum design through electromagnetic and flow analysis (C.F.X & FLUX 2D)

Application

  • Pump, Fan, Compressor, Crane, Mill, Crusher
  • General and steel industries
  • Petrochemical and cement plants
  • Hydraulic & thermal power plants
  • Atomic power plant (Class-1E (Q-Class) & Non Class-1E Motor)
  • Ships

Scope of Production

Output
maximum of 20,000kW
Voltage
maximum of 13.2kV
Enclosure
TEFC, TEAAC, TEAO, ODP, WPI, WPII, Water-Cooled or Pipe-Ventilated, and Explosion-Proof
Insulation class
F-type, H-type
Voltage range
3,300 ~ 13,800V
Frequency
50Hz , 60Hz

R&D

As well as designing the next-generation technology, Hyosung is continuously developing its own technology based on the evolving equipment. We create an optimized design using a magnetic field analysis program which models factors such as magnetic flux distribution, torque-speed, and magnetic flux distribution in the air gap. In addition, the structure analysis is performed through ANSYS or NASTRAN which calculates effects from the structural arrangement, stress, and inertia.Through the optimal material, enclosure, bearing system, and accessories, motors can be operated with appropriate speed while meeting customer’s specifications

Three Phase Induction Motor

FR Number: 400

kW: 933

Pole: 2 P

Voltage: 4000 V

FL Amps: 154.0 A

LR Amps: 1001.0 A

RPM: 3540 r/min

Freq: 60 Hz

Phase: 3 PH

Efficiency: 96%

Power Factor: 91%

Rotor WT: 560 kg

Motor WT: 4000 kg

Type: HSWP11

Ins. Class: F

Service Factor: 1.0

Max Ambient: -25 -40°C

Temp Rise: 80°C

Time Rating: Continuous

Locked KVA/KW: 7.7

Safe Stall Time (H/C): 17/23 sec

Design: B

Nonodrive Side Bag: Sleeve

Drive Side Bag: Sleeve

Date: 2011. 12.

Serial Number: LB80398202-4


Need more information? Ready to place an order?
Please call 1-855-5CALROC (225762), use our contact page or talk to one of our sales experts directly:

Dan Echino
Cell: 403-613-7134
E-mail: dan@calroc.ca

Larry Holman
Cell: 403-852-0966
E-mail: larry@calroc.ca